Paper Pterodactyl Puppet

paper pterodactyl puppet craft for kids

Here is a fun and easy paper pterodactyl puppet craft for kids.

I love puppet crafts because they provide kids with a fun activity along with a DIY toy to play with (keeping them occupied for a little bit longer, haha). 

This is perfect for dinosaur lovers, and is great when you need a low-mess, low-prep activity to keep your kiddos busy.

This printable craft was first published in 2015 and has been updated and reshared for today’s audience

Get the template here

paper pterodactyl puppet - make paper puppet that flies on a string in the shape of a flying pterodactyl

Not long ago I made some toilet roll dinosaurs. There was a Triceratops and Diplodocus and I had planned to add to the collection with a Pterodactyl. Turns out it worked better and was easier to make from paper, which is not quite as trendy as crafting with paper rolls right now but just as much fun don’t you think?

My girls were very taken with these puppets, they named them Snowflake, Pineapple and Hearts (the green one is Hearts). Here is a quick tutorial on how you can make one at home, it won’t take long.

How to make a Paper Pterodactyl Puppet

You will need

  • String
  • A long craft stick or dowel rod (or any stick really)
  • A hole punch and scissors
  • Tape
  • The printable template, printed to a sheet of coloured light cardstock

paper template to make the flying pterodactyl puppet

How to

To begin with score the fold line with a blunt knife (like a butter knife) and ruler. This might sound a bit weird and unnecessary but it gives you a really perfect, clean fold. You will find it’s really easy to fold after scoring the line and it helps for this project because the Pterodactyl balances on a single string so any unevenness might cause it to tilt off balance and not work properly.

score the fold line first

fold and cut the template

Once it’s folded cut along the black line with a pair of scissors, including the slit on the head and the extra mouth piece on the bottom of the page.

fold the wings back

Fold the wings down evenly. The mouth piece goes through the slit with half of it sticking out the top for the spike on the back of the Pterodactyl’s skull.

add the mouth

Use a hole punch to carefully make two holes over the dots marked, trying to keep them right on the fold line to keep your puppet balanced.

thread the string

Then tie the string through the two holes and onto the stick and you have your puppet!

If you find that your puppet won’t balance properly you might need to add a small piece of tape underneath on it’s belly to keep the string in place. I made about six of these and only one actually needed the tape.

paper pterodactyl puppets - make paper puppet that flies on a string in the shape of a flying pterodactyl

paper dinosaur craft idea

They were a hit at our place!

More ideas for dinosaur fans

paper dinosaur craft idea for kids – make a flying pterodactyl puppet on a string

Check out more of our Animal Printables

Similar Posts

  • printable nativity scene

    Recreate the Christmas nativity from paper with our latest product – a printable nativity scene. This is an easy paper craft for all ages from kids to adults. The finished nativity can be used for storytelling the first Christmas and also makes a lovely decoration for your mantlepiece. Get your copy here We’ve done lots…

  • Shamrock Bath Bombs

    Make some delightful, scented shamrock bath bombs for St Patricks Day! This recipe is by Bath Bomb expert Kelly Hutchison from Kicking it with Kelly, who last time showed us how to make beautiful Peaches’n Cream bath bombs. What better way to celebrate on St Patricks day than in a fizzing green bath that smells…

  • Sandbox small world play

    Today we’re showing you how to make a sandbox small world to encourage imaginary play. Preschoolers will love this activity, I found it kept my daughter busy for a long time. This small world idea is super easy to set up at home – no backyard sandpit necessary! This activity was originally created in 2014…

  • 3D printable bee

    This 3D printable bee craft enables kids to make a realistic paper model of a honey bee, complete with anatomy labels. This is a fun and educational activity for kids who are learning about bees or minibeasts. It’s been designed for ages 8+, but the cutting and gluing is simple so younger kids may be…

48 Comments

    1. It’s not that big. I don’t have the finished printable on hand to measure it right now but the length from the tip of it’s nose to the end of it’s body is (approx) just under 5 inches

      Reply

  6. I cant get the template to download it wont even open up.. I’d really love to print this for my son’s upcoming birthday ..can it be emailed to me please?

    Reply

    1. Hi Destany, you need to enter your details into the space provided and the template will be sent to you

      Reply

  15. Hello, I was wondering if you had an SVG or other Cricut approved file for this pterodactyl template! thank you!

    Reply

  16. I requested the free pterodactyl puppet template and have not received it. I got the dinosaur jokes yesterday and confirmed my email address. Can you help?

    Reply

  17. Hi there, can I have a copy of the free pterodactyl puppet template, please. Would love to use it children’s art and craft.

    Many thanks.

    Reply

  19. muchas gracias por compartir esta lindas plantillas, la verdad me encantan los dinosaurios, bendiciones que la creatividad siga fluyendo en usted, mil gracias!!!

    Reply

    1. A form should appear with a space to enter your email address to get the download emailed to you. I Just double-checked and tested the form, it’s working for me.

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *